Standard Operating Procedures

Introduction

Standard Operating Procedures (SOPs) are a set of instructions written to help individuals carry out a routine, complex task. SOPs should be written for all materials and procedures that pose a potential risk to the health and safety of laboratory personnel. SOPs should include:

  • The Purpose of the SOP.
  • Exposure control measures and safety precautions. These should address both routine and accidental chemical, physical, biological, or radiological hazards associated with the procedure.
  • Be implemented as a primary means to inform and educate laboratory personnel about hazards in their work place.

All SOPs should be written by someone who has sound knowledge and experience with the material, equipment, and related procedures. The Principal Investigator (PI) or Laboratory Supervisor is ultimately responsible for the development of SOPs and should review the information to determine if it is accurate and adequate.

The Role of Risk Assessment

A risk assessment is the foundation of a good SOP. Before writing an SOP, the author should think through all steps of a procedure and perform a risk assessment. A good risk assessment evaluates the hazards present during a procedure, as well as the risk associated with those hazards.

For more detailed information about risk assessment, please see our Risk Assessment page.

Standard Operating Procedures in Research - "The Sandbox"

Standard Operating Procedures pose a unique challenge in the research environment. Research is working towards the development of reproducible results and procedures. Research is working towards the development of SOPs. Often, research labs will not have a step-by-step set of instructions to work with, and may plan on using a variety of techniques during their experiment. However, SOPs can still be used during research, if thought about from a different perspective.

When preparing SOPs in a research environment, they can be viewed as a set of guidelines for working in a “sandbox”. The materials used are known, and therefore the hazards and associate risk are also known. The exact quantities and conditions between experiments may vary, but limits can be placed based on the estimated needs of the experiment, and the risks associated with them. These limits form the edges of the sandbox.

Considering the parameters set by the SOP like a sandbox, you are able to define what tools you can use, and the limits at which you can use them.  This will involve selecting and performing a risk assessment on a range of parameters ahead of time, such as the risks associated with approved solvents or temperature and pressure limits.

Once the research expands beyond the scope (edges) of the sandbox, the SOP should be reevaluated and a new risk assessment should be performed. Expanding beyond the “box” can include scaling up a reaction beyond the limits placed initially, utilizing a new solvent other than the approved solvents, adjusting the temperature, changing the pressure, or any variety of adjustments made beyond the scope defined in the SOP.  The existing SOP can be updated to reflect the change in materials or conditions, and the new risk assessment can be performed.

Utilizing Existing SOPs

While research often involves method development, many laboratory procedures are previously known.  In these cases, there is no need to reinvent the wheel. Available resources can provide a detailed SOP with little additional effort.

For example, many routine assays in biological labs are handled through the use of assay kits (such as protein or DNA extraction kits). While one should always be assessing the risk of their work, kits will include a protocol (a set of instructions and often hazard identification), and Safety Data Sheets are readily available for additional information. This information will include all of the required content of an SOP.

Researchers can incorporate procedures that are known to be safe. A variety of resources can be used for this purpose, and several examples are listed below.

  • Documents from the DRS Safety Library
  • Protocols provided by the manufacturer
  • Instrument or equipment manuals
  • Textbooks/published works (e.g. Vogel’s Textbook of Practical Organic Chemistry)

Incorporating known procedures along with hazard awareness documents provided by DRS will prevent the need to create an SOP from scratch. In other words, there is no need to reinvent the wheel if it has been done before.

Evaluating the risk is something that should happen at all stages of the experiment, from the SOP writer to the user, so it is important to evaluate the risk assessment even when a protocol is included, or when using any existing SOP.

SOP Format

An SOP template is provided, but SOPs may be written in different formats that better suit the procedures and information/training needs of the laboratory group. The level of detail of an SOP is dictated by the level of complexity of the procedure as well as the hazardous nature of the material or equipment involved. In some cases, experiments or procedures that have common risk elements and require similar or identical safety precautions may be covered by a single SOP. Sometimes an existing guidance document (see Safety References for Writing SOPs below) can serve as an adequate SOP with little augmentation or customization. Elements common to all SOPs are as follows:  

  1. Scope/Synopsis – This is a short summary of the applicability or purpose of the SOP. Any limits to the procedure should be written here. This is used to determine if a previously written SOP can be used for a future experiment.
  2. Hazard Identification/Risk Assessment Summary – This section includes a summary of hazardous materials and conditions, in addition to engineering controls and personal protective equipment required for the procedure that have been identified through a risk assessment.
  3. Procedure/Techniques –This section describes the procedure step-by-step. It is important to provide significant detail so that lab personnel can operate under the most ideal conditions and perform the procedure safely.
  4. Disposal and Cleanup –This section should have detailed disposal guidelines (waste compatibility, quench techniques) along with proper shut down procedures for equipment or experiments.
  5. Emergency Response –This section should include any emergency response procedures that are different or in addition to from general emergency response outlined on the DRS website or in the Laboratory Safety Guide.
  6. Training Documentation – A means for documenting training on the SOP must be developed – see Training Checklist page. This can be either a paper-based or electronic method of record-keeping.

Safety References for Writing SOPs

Many resources can be used in the development of SOPs. The Safety Library at the DRS website provides guidance documents on safety-related topics. Information in these guidance documents, as well as other respected sources (Prudent Practices, eEROS, textbooks, etc.) can be incorporated into hazard and laboratory-specific SOPs.)

SOP Template

SOP Example

SOP Template for Chemical Experiments

Laser SOP Template

Laser SOP Sample



Last Update: 2/20/2020